Looking to elevate your IKEA Antilop highchair? Our vinyl leg wraps, specifically made to fit the IKEA Highchair (which comes in a range of colours!) are the perfect addition for a stylish and personalised look. With 5 wraps included (plus 1 extra for practice), DIY customisation has never been easier!
📹 Watch Our Tutorial
Follow along with our viral video to see the full step-by-step process:
🪑 What You’ll Need
- An IKEA Antilop highchair (legs removed for ease)
- Vinyl leg wraps (5 included packs)
- A soft cloth or squeegee for smoothing
🛠️ Step-by-Step Application
1. Prepare the Legs
Ensure the highchair legs are clean and completely dry—this is key for optimal vinyl adhesion.
2. Align the Wrap
Begin at the top, aligning the vinyl’s top edge perfectly with the edge of the leg for a seamless start.
3. Peel & Apply
Gently peel back the backing as you press the wrap down along one edge, maintaining a straight line.
4. Roll & Smooth
Roll the leg under your hand, smoothing with a cloth or squeegee to eliminate bubbles or creases.
5. Repeat & Enjoy
Repeat for each of the four legs. Use your extra wrap to perfect your technique or keep as a spare!
✨ Pro Tip
Made a mistake? Gently peel and reposition the wrap before fully pressing it down—it’s more forgiving than you think!
🔗 Shop Highchair Accessories
Once your wraps are on, consider finishing the look with:
🎯 Why This Works
This is a top high-chair customisation hack that combines form and function—elevating your IKEA Antilop with modern design that’s easy to apply and remove.
